Pinstripe Baseball Jerseys
Custom pinstripe baseball jerseys with woven or printed stripes, button-up and two-button builds.
A pinstripe jersey is a classic baseball look, but the stripe is a construction decision, not just a pattern. Woven stripes, printed stripes and the way the stripe lines up at the seams all change the final jersey.
We make custom pinstripe baseball jerseys for teams, schools and brands. You send the design, colors and roster. We confirm the mockup and sample before bulk production.

Solid, printed or woven
| Build | How it looks | Cost impact | Planning impact |
|---|---|---|---|
| Solid (no stripe) | One color across the body | Lowest of the three | Standard cutting, no stripe layout |
| Printed stripe | The stripe is printed onto the fabric | Below woven, above solid | Artwork must include panel and seam allowance |
| Woven stripe | The stripe is part of the fabric | Highest of the three | Fabric layout planned before cutting |
A solid body is the cheapest build and needs no stripe planning. Woven stripes are the traditional choice and give a clean, flat look. Printed stripes allow more color and placement options, but the stripe has to be planned across the cut panels so it lines up at the seams. Tell us which look you want and we will confirm the build.
Pinstripe jersey styles
- Button-up. The classic full front placket with pinstripes.
- Two-button. A pullover body with a short placket and a cleaner front.
- Sleeveless. For hot weather or a layered look.
- Youth jersey. A separate pattern for youth teams.
- Women’s cut. A separate pattern through the chest and waist.
Fabric and decoration
| Choice | What it gives you | Best for |
|---|---|---|
| Mesh | Breathable, lightweight, classic baseball texture | Summer league and practice |
| Interlock | Smoother surface, slightly heavier hand | Match jerseys and retail-style uniforms |
| Sublimation | Full-color graphics with no ink layer | Printed stripes and complex color |
| Tackle twill | Sewn letters and numbers with a raised look | Traditional team uniforms |
| Embroidery | Textured crest on heavier fabric | Crests and small logos |
Stripe alignment at seams
The hardest part of a pinstripe jersey is the seam. The stripe has to line up across the front placket, side seams and sleeves. On a printed stripe, the artwork must include the panel layout and seam allowance.
On a woven stripe, the fabric layout has to be planned before cutting. A stripe that runs in the wrong direction on a sleeve is visible immediately. We confirm the stripe direction and seam alignment on the mockup and sample.
What drives the price
A solid-color jersey and a pinstripe jersey are not priced the same. Woven stripes cost more than a solid body because the fabric is woven with the stripe and the layout has to be planned before cutting. Printed stripes cost less than woven, but the artwork needs panel and seam planning, which adds design time rather than fabric cost.
Quantity and decoration move the number more than the stripe does. Send the design, quantity and size breakdown and we quote the build in writing: the figure covers names and numbers from your roster, and shipping is quoted FOB, CIF or DDP.
Names, numbers and rosters
Pinstripe jerseys usually use a contrasting number and nameplate. Check the contrast against the stripe so the number stays readable.
- Confirm the name format and spelling.
- Check for duplicate numbers before production.
- Confirm the number font and outline against the stripe.
- Send the roster as a spreadsheet.
We proof the sheet with you and get your sign-off before production. If a name or number is still wrong on the bulk run, we remake that player’s jersey free and ship it at our cost.
Design mockup and sample
Send your design, stripe direction, colors and roster. We return a mockup with front and back views, stripe layout and number placement.
For a standard baseball build, see custom baseball jerseys. For the full uniform, see custom team uniforms.
You can also send your design through the jersey designer and use that file as the brief. After the mockup is approved, we make a sample. Check the stripe alignment, placket, number contrast and fit before you approve bulk production.

How to order, step by step
- Send the brief. Sport, pinstripe build, colors, logo, roster with sizes, quantity and deadline. A reference jersey photo helps if you have one.
- Approve the mockup (about 48 hours). Front and back views with the stripe layout, placket, crest placement, fonts and numbers.
- Approve the sample (7–10 days). The sample is cut on the production line that runs your bulk order, from the same fabric roll. Check the stripe alignment, placket, number contrast and fit.
- Bulk production (3–4 weeks). Files are locked, names and numbers are checked against the signed roster sheet, and the approved sample stays sealed as the reference.
FAQ
Can you make woven pinstripe jerseys?
Yes. Woven stripes are the traditional build. The stripe layout is limited by the fabric, so confirm the direction and spacing before sampling.
Can you print pinstripes instead?
Yes. Printed stripes allow more placement and color options. The artwork needs the panel layout and bleed so the stripe lines up at the seams.
Do pinstripes line up at the seams?
They should. The mockup and sample are where we confirm the alignment. A printed stripe needs seam planning; a woven stripe needs the right fabric layout.
Can you make a two-button pinstripe jersey?
Yes. The two-button front uses a short placket and a cleaner front. The stripe layout is confirmed on the mockup.
Can you match our team colors?
Send a Pantone number or a physical swatch. We match against the fabric, not a screen.
Can you add names and numbers?
Yes. Send the roster with spelling, number and size. We confirm the contrast against the stripe, proof the sheet with you and get your sign-off before production. If a name or number is still wrong on the bulk run, we remake that player’s jersey free and ship it at our cost.
Do you make youth pinstripe jerseys?
Yes. Youth jerseys use a separate pattern. Measure each player rather than ordering by age.
What is the minimum order and lead time?
From 15 pieces per style. A mockup takes about 48 hours, a sample 7–10 days, and bulk production 3–4 weeks after the sample is approved. Pinstripes, special fabrics or a new color can raise the MOQ; send the design and quantity and we confirm both in writing.
Can I see a sample before ordering?
Yes. A sample follows the approved mockup and takes 7-10 days. It is cut on the production line that runs your bulk order, from the same fabric roll, so the stripe alignment and fabric you check are the ones you receive.
What payment terms do you accept?
30% deposit by T/T to start production, 70% before shipment. We work on bank transfer (T/T); tell us at the quoting stage if you need a different arrangement.
Do you ship DDP or FOB, and from which port?
We ship from Shanghai and quote FOB, CIF or DDP depending on the destination. Tell us the country and city at the quoting stage so the shipping term and the delivery date are clear.
Will you sign an NDA before we send our designs?
Yes. Send your NDA before the artwork or roster is shared and we sign it first. Patterns, artwork and roster files stay tied to your order and are not used for anyone else.
Are you a factory or a trading company?
A factory. Jerseys and uniforms are patterned, cut, sewn and decorated in our own cut-and-sew workshop at No. 6 Huanhu Village East, Yushan Town, Changshu, Suzhou, Jiangsu, China; we do not pass orders to a third party. You are welcome to visit the workshop: message us a few days before you come so someone is on site to walk you through production.
Can we use a third-party inspection before shipment?
Yes. Tell us at the quoting stage and we schedule the third-party inspection before the goods leave, so the report comes back while the balance payment is still ahead of you.
